As an Amazon Associate, I earn from qualifying purchases
To replace a belt on a Bissell vacuum cleaner, first unplug the vacuum. Then, remove the brush cover to access the belt.
Maintaining your Bissell vacuum cleaner ensures it operates efficiently. A worn-out belt can lead to reduced suction and ineffective cleaning. Replacing the belt is a simple process that can prolong the vacuum’s life and improve its performance. This guide provides clear, step-by-step instructions for replacing the belt.
You’ll need basic tools and a new belt specific to your Bissell model. Regular belt replacement keeps your vacuum functioning optimally, saving you money on repairs and ensuring your home stays clean. Follow these steps to maintain your vacuum cleaner and enjoy better cleaning results.
Safety Precautions
Replacing a belt on a Bissell vacuum cleaner may seem simple. But safety should always come first. Follow these safety precautions to ensure a smooth and safe process.
Unplugging The Vacuum
Before starting any repair, always unplug the vacuum from the power source. This step prevents accidental shocks or injuries.
- Locate the power cord.
- Firmly pull the plug from the outlet.
- Ensure the vacuum is completely off.
Handling Sharp Parts
Vacuum cleaners have sharp parts. Handle these parts with care to avoid cuts or injuries.
- Wear protective gloves.
- Use proper tools for disassembly.
- Keep fingers away from sharp edges.
| Parts | Safety Tips |
|---|---|
| Blades | Use a cloth to handle. |
| Screws | Use a screwdriver, not fingers. |
Following these safety precautions ensures a safe belt replacement. Stay safe and happy cleaning!
Removing The Old Belt
Removing the old belt from your Bissell vacuum cleaner is a simple task. Follow these steps to ensure a smooth process. Proper handling can prevent damage to your vacuum cleaner.
Accessing The Belt Area
First, unplug your vacuum cleaner. This ensures safety. Lay the vacuum cleaner on a flat surface. Look for the screws on the bottom plate. Use a screwdriver to remove these screws. Keep the screws in a safe place. Now, lift off the bottom plate. You can see the belt and brush roll.
Taking Off The Belt
Next, remove the brush roll from the vacuum cleaner. Gently pull the brush roll out. The old belt is wrapped around it. Slide the belt off the brush roll. Then, remove the belt from the motor shaft. The old belt is now completely removed.
If the belt is tight, use a flat-head screwdriver. Pry the belt off carefully. Avoid damaging the motor shaft. Now, check the brush roll and motor shaft. Ensure they are clean before installing the new belt.
Inspecting The Brush Roll
Replacing the belt on your Bissell vacuum cleaner is crucial. First, inspect the brush roll. This step ensures the vacuum works efficiently. A clean brush roll makes a huge difference.
Checking For Debris
First, turn off the vacuum and unplug it. Look at the brush roll area. Use a flashlight if needed. Check for any large debris stuck in the bristles. Remove items like hair, strings, or large dust balls. These can block the brush roll.
- Turn off and unplug the vacuum.
- Inspect the brush roll area.
- Use a flashlight for better visibility.
- Remove any large debris.
Cleaning The Brush Roll
After removing the large debris, clean the brush roll. Use a pair of scissors to cut tangled hair. Be careful not to damage the bristles. Rotate the brush roll manually and check for any other blockages. A clean brush roll helps the vacuum work better.
- Remove large debris.
- Use scissors to cut tangled hair.
- Rotate the brush roll manually.
- Check for other blockages.
Inspecting and cleaning the brush roll makes your vacuum more effective. This simple step can extend the life of your vacuum cleaner.
Choosing The Right Replacement Belt
Replacing the belt on your Bissell vacuum cleaner is crucial for performance. Selecting the correct belt ensures your vacuum runs smoothly.
Compatible Belt Types
Not all belts fit every Bissell vacuum cleaner model. Check your vacuum’s model number. Find the model number on the vacuum’s label or manual. Use this number to identify the compatible belt type.
Here are some common Bissell belt types:
- Style 7/9/10 – Fits most upright models.
- Style 12 – Works with specific bagless models.
- Style 20 – Designed for multi-surface machines.
Where To Buy
You can purchase Bissell vacuum belts from various sources. Here are some popular options:
| Store | Options | Website |
|---|---|---|
| Amazon | Wide selection, fast shipping | www.amazon.com |
| Walmart | In-store pickup available | www.walmart.com |
| Bissell | Official parts and accessories | www.bissell.com |
Local hardware stores also carry vacuum belts. Always check for compatibility before purchasing.
Installing The New Belt
Replacing the belt on your Bissell vacuum cleaner can seem daunting. With a few simple steps, you can have your vacuum running like new. Follow these instructions to install the new belt properly.
Positioning The Belt
First, ensure the vacuum is unplugged. This is crucial for your safety. Next, locate the belt area on your vacuum. The belt is usually near the brush roll. Slide the new belt around the motor shaft. Make sure it is centered. Check that the belt is not twisted or damaged.
Use a flathead screwdriver to help guide the belt. This tool can make it easier to position the belt correctly. Once the belt is around the motor shaft, move on to securing it.
Securing The Belt
Now, place the belt over the brush roll. Make sure it fits snugly. Rotate the brush roll to ensure the belt is properly aligned. If the belt slips off, reposition it and try again.
After the belt is in place, reassemble the vacuum cleaner. This includes attaching the brush roll cover and securing any screws. Double-check that all parts are secure before plugging in the vacuum. Turn on the vacuum to test the new belt. If everything works, you have successfully replaced the belt.
Here is a quick checklist for securing the belt:
- Place belt over the brush roll
- Ensure the belt fits snugly
- Rotate the brush roll for alignment
- Reassemble the vacuum cleaner
- Test the new belt
Replacing a belt on a Bissell vacuum cleaner is a simple task. With these steps, you can keep your vacuum in top condition.
Reassembling The Vacuum
Once you’ve replaced the belt on your Bissell vacuum cleaner, it’s time for reassembling. Proper reassembly ensures your vacuum works efficiently. Let’s go through the steps to reassemble your vacuum cleaner correctly.
Reattaching The Cover
First, place the cover back onto the vacuum base. Align the cover with the screw holes. Ensure the cover sits flush against the base.
Next, insert the screws into the holes. Use a screwdriver to tighten each screw. Make sure the screws are secure but not overly tight.
Ensuring Proper Fit
Check all parts to ensure they fit properly. The cover should not wobble. If it does, you may need to readjust.
Next, check the brush roll. It should spin freely. If it doesn’t, double-check the belt installation.
Finally, test the vacuum. Plug it in and turn it on. Ensure it operates smoothly without unusual noises.
Reassembling your vacuum properly ensures it works efficiently. Follow each step carefully for best results.
Testing The Vacuum
After replacing the belt on your Bissell vacuum cleaner, it’s important to test it. This ensures the vacuum is working properly and the belt is installed correctly. Follow these steps to make sure everything is in order.
Powering On
First, plug the vacuum cleaner into a power outlet. Make sure the power switch is in the “off” position before plugging in.
Next, turn the power switch to the “on” position. Listen for any unusual sounds. The vacuum should start smoothly without any strange noises.
Checking For Proper Operation
Once the vacuum is powered on, test its suction power. Place the vacuum on a carpeted area and slowly move it back and forth.
Check if the brush roll is spinning. Look through the clear cover or flip the vacuum over carefully.
Ensure there are no obstructions. If the vacuum is picking up debris efficiently, the belt replacement is successful.
If the vacuum is not working properly, turn it off and check the belt installation again. Make sure the belt is not too loose or too tight.
Testing the vacuum after replacing the belt is crucial. This ensures your Bissell vacuum cleaner performs at its best.
Maintenance Tips
Proper maintenance keeps your Bissell vacuum cleaner running smoothly. Follow these tips to ensure your vacuum’s longevity.
Regular Belt Inspection
Inspecting the belt is essential. A worn-out belt reduces vacuum performance. Look for cracks, frays, and wear.
Replace the belt if you notice any damage. Regular checks prevent unexpected breakdowns.
Steps to Inspect the Belt:
- Unplug the vacuum cleaner.
- Remove the brush roll cover.
- Check the belt for any signs of wear.
Cleaning Routine
A clean vacuum performs better and lasts longer. Follow a regular cleaning routine.
Cleaning Routine:
- Empty the dustbin after each use.
- Clean the filters monthly.
- Check for clogs in the hose and brush roll.
Proper cleaning ensures your vacuum runs efficiently. It also prevents the belt from unnecessary strain.
| Maintenance Task | Frequency |
|---|---|
| Inspect Belt | Monthly |
| Clean Filters | Monthly |
| Empty Dustbin | After Each Use |
| Check for Clogs | Monthly |
Frequently Asked Questions
How Do I Change The Belt On My Bissell Vacuum?
Turn off and unplug the vacuum. Remove the bottom cover. Take out the old belt. Place the new belt around the motor shaft and brush roll. Reattach the bottom cover. Plug in and test.
How To Replace A Belt In A Vacuum Cleaner?
Unplug the vacuum cleaner. Open the casing to access the belt. Remove the old belt. Install the new belt around the motor shaft and brush roll. Reassemble the vacuum cleaner. Test it to ensure proper operation.
How To Put A Belt On A Bissell Powerforce Compact Turbo Vacuum?
To put a belt on a Bissell PowerForce Compact Turbo vacuum, unplug the vacuum, remove the bottom cover, and slip the belt onto the motor shaft and brush roll. Reattach the cover and plug in the vacuum.
Why Is My Bissell Vacuum Brush Not Spinning?
Your Bissell vacuum brush might not be spinning due to tangled hair, a broken belt, or a faulty motor. Check and clean the brush roll and replace the belt if necessary. Ensure the vacuum is properly assembled and the motor is functioning correctly.
Conclusion
Replacing a belt on a Bissell vacuum cleaner is simple and straightforward. Follow the steps mentioned for efficient results. Regular maintenance ensures your vacuum works optimally. Always keep spare belts handy. This quick fix saves time and extends your vacuum’s life.
Happy cleaning!
As an Amazon Associate, I earn from qualifying purchases
